logo
Goede prijs  online

details van de producten

Huis > Producten >
Beslagen Buis
>
Furnaces Alloy Studded Tubes ASTM A335 P5 Ideal For Corrosive Environment

Furnaces Alloy Studded Tubes ASTM A335 P5 Ideal For Corrosive Environment

Merknaam: YUHONG
Modelnummer: ASTM A335 P5 Legering bezaaid buizen
MOQ: Afhankelijk van de grootte van de schalen
Prijs: Onderhandelbaar
Verpakking: Ply-hout case met ijzeren frame
Betalingsvoorwaarden: TT, LC
Detailinformatie
Plaats van herkomst:
China
Certificering:
ABS, BV, DNV, CCS, LR
Type:
Ovens bezaaide buizen
Standards voor gespitste buizen:
ASTM A335
Materiaal van gepoetste buizen:
P5 legering stalen basisbuizen en CS -vinnen
Studded buizen maat en lengte:
Zoals vereist door klanten
Verpakking van gepoetste buizen:
Ply-hout case met ijzeren frame
Toepassing met bezaaid buizen:
Voor grote apparatuur: warmtewisselaar/ketel/oven/condensatoren/verdampers, enz.
Levering vermogen:
1000 ton/maand
Markeren:

ASTM A335 P5 studded tubes

,

corrosion resistant alloy furnace tubes

,

studded tubes for corrosive environments

Productomschrijving

Furnaces Alloy Studded Tubes ASTM A335 P5 Ideal For Corrosive Environment

 

ASTM A335/ASME SA335 specification for seamless ferritic alloy steel pipe for high temperature service, for example: pipeline systems of power stations, petrochemical plants and oil refineries,etc.This standard encompasses multiple grades, each corresponding to a specific alloy chemical composition and performance. Grade is usually indicated by the letter "P" followed by a number, which roughly represents one percent of the chromium content in the alloy.

 

It must be manufactured by seamless processes, such as hot rolling, cold drawing or extrusion.

Related Tests: Chemical Analysis, Tension Test ( Tensile Strength, Yield Strength, Elongation), Hydrostatic Test, Nondestructive Examination (Eddy Current Testing-ET, Ultrasonic Testing-UT), Hardness Test, Metastographic Examination and other Supplementary Requirements.

 

Chemical Composition (%)

 

Grade C Mn P S Si Cr Mo
P5 0.15max 0.30-0.60 0.025 0.025 0.50max 4.00-6.00 0.45-0.65

 

Mechanical Properties

 

Grade Tensile Strength,min Yield Strength (0.2%Offset,min)
P5 60ksi (415 MPa) 30ksi (205 MPa)

 

Studded Tubes

 

In petrochemical industry, studded tubes are widely used. Especially in tubular furnaces, in order to enhance the heat transfer effect outside the tube, the heat transfer element often adopts studded tubes. 

 

Studded tubes typically produced from materials such as carbon steel, stainless steel, alloy or copper, providing durability and resistance to corrosion.

 

Application 

 

Cooling systems

Common in cooling towers, condensers, and evaporators.

 

Heat Exchangers,Furnaces

Furnace waterwall panels of chemical recovery boilers;Metallurgical Furnaces; Petrochemical Heaters; Waste Incinerators.

Widely used in industrial heat exchangers for power generation, petrochemical processes, and HVAC systems.

 

Marine Applications

Used in ship cooling systems and other marine heat exchangers where robust performance is required.

 

Furnaces Alloy Studded Tubes ASTM A335 P5 Ideal For Corrosive Environment 0

Beoordelingen en recensie

Algemene Beoordeling

4.0
Gebaseerd op 50 beoordelingen voor deze leverancier

Beoordelingsmomentopname

Het volgende is de verdeling van alle beoordelingen
5 sterren
0%
4 sterren
100%
3 sterren
0%
2 sterren
0%
1 sterren
0%

Alle recensies

M
Mansour
Egypt Jan 10.2026
The 13Cr pins add some cost, but for sour service in furnaces, it's worth it. Already seeing longer run times between turnarounds compared to before.
R
Rashid
United Arab Emirates Dec 10.2025
Good oxidation resistance, matches well with the T9. No scaling or thinning noticed.
P
P*l
India Sep 16.2025
No leaks, no fin damage, performance consistent. Heat transfer hasn't dropped, so fouling doesn't seem to be a problem yet.